Email this page to a friend with a personal message
Designed specially for school projects -- The Digital/Analog Trainer it is built on a single PC board for maximum reliability. It includes 5 built-in power supplies, a function generator with continuously variable sine, triangular and square wave forms. All power supplies are regulated and protected against shorts. The trainer is mounted in a molded organizer case. The tool pallet has many pockets and elastic retainers to hold a broad line of tools and devices. A special ramp in the case will hold the meter of your choice. -- Tools Included in Case: -- **ET-10 IC puller -- **JW-140 Jumper wire kit -- **-SP-2 Desoldering pump -- **-ST-1 Mini diagonal cutters -- **-ST-2 Mini long nose pliers -- **-ST-3 Wire stripper -- **-ST-5 Screwdriver slotted 3/16" -- **-ST-6 Screwdriver #1 phillips -- **-Anti-static foam pad -- Power Supplies: -- **Variable Power Supply -- **0V to 20VDC @ 0.5A -- (0V to 15VDC @ 1A) -- **0V to -20VDC @ 0.5A -- (0V to -15VDC @ 1A) -- **+12VDC @ 1A -- **-12VDC @ 1A -- **+5VDC @ 1A -- **+30VAC center-tapped to 15VAC @ 1A -- Analog Section:
--
**Function Generator - Sine, Triangular, Square Wave -- **Frequency adjustable in five ranges from 1 to 100kHz -- **Fine frequency adjust -- **Amplitude adjust -- **DC offset -- Digital Section:
--
**Eight data switches -- **Two no bounce logic switches -- **Eight LED readouts, buffered. -- **Clock frequency 1 to 100kHz -- **Clock amplitude 5Vpp square wave -- Fast Track Construction: Most of the components are on one PC board, eliminating all wires between the PC board, pots, regulators and switches. Makes assembly easier and faster, eliminates errors.
Price: $249.95 Click here for more info.
« Digital/Analog Trainer without Tools | Science Fair Store | Digital Pocket Stem Thermometer »
